1. 70×33 Extruder:2 sets
(1) Main motor power: 30KW;
(2) Screw diameter: 70mm;
(3) L:D: 33:1; Material of screw: 38CrMoALA
(4) Rotation speed of screw: 0～90rpm
(5) Hard tooth-faced speed reducer: Jiangsu Haoke Gearbox group.
(6) Pressure automatic feedback system can adjust the screw speed automatically.
(7) Cast aluminium heating rings.
(8) Metering pump:2 sets
Spinneret: 1 set, components: 2 sets
(9) Static mixer: 1 set
(10) Automatic screen changer: 1 set
2. Cooling water tank: 1 set
(1) The tank is made by stainless steel 304.
(2) The height of tank is adjustable by motor and the horizontal pushing structure is conveniently to disassembly the spinneret.
3. Seven roller stretching unit A, 0-120m/min: 1 Set
(1) Steel roller size: φ270×700×7
The 7 rollers are made by SS 304 with hard chrome plating.
(2) Steel structure cabinet with gear transmission makes the roller run smoothly.
No pressure rollers.
(4) The stretching unit is covered with stainless steel 304 plate to prevent the water.
4. Hot water tank: 1 set
(1) Tank length:4000mm
(2) The water is heated by copper heating tube, the heating power: 50kw,
(3) The tank is made by SS 304 with the insulation.
5. Water removal system with moisture absorption: 1 set
(1) Fan power:4kw×1 set
6. Seven roller stretching unit B,0-350m/min: 1 Set
(1) Steel roller size: φ350×700×7.
The 7 rollers are made by SS 304 with hard chrome plating.
(2) The stretching unit is covered with stainless steel 304 plate to prevent the water.
7. Waster yarn collector system: 1 set
(1) Motor power: 7.5KW
8. Air texturing machines: 13 ends
Specification for each end:
(1) Gas heating barrel:1 sets
(2) Main conveying pipe:1 set,
Each pipe has control valve
(3) Heating roller and drive: 2 sets, frequency control.
The roller is heated by electric and temperature control independently.
(4) Tension roller: 2 sets, aluminum oxide processing
(5) Nozzle:1set
9. Conveyer device: 3 sets+1 piece
(1) 1 set includes 4 working position.
(2) Length of conveyer belt is 3800mm.
10. Automatic tension feedback winder: 13 spindles
(1) Motor of tension roller:0.5kw
(2) Winding motor:0.25kw
(3) Bobbin size based on customer’s requirements.
11. Total installation power: 300KW
12. Total weight: 22T
Parameter:
| Screw diameter | Φ65-80mm |
| Raw material | LLDPE | Filament size | 0.05-4mm |
| Capacity | 40-125Kg/H | Filament shape | Curly |
| Screw L:D | 3:1 | Stretching unit | 2 sets |
| Screw material | 38CrMoALA | Winder | 13-24 spindles |
| Max linear speed | 300m/min | Instillation power | 200-350Kw |
| Nozzle holes | 184 holes | Overall size | 42-58×2.8×2.8m |
Pictures:
